A set of LED bulbs H4 C6 Bridgelux COB ™ 7600 lm

LED H4 Chip-on-Board Cob Bridgelux ™ 7600 LM

replacement of ordinary H4 light bulbs (low beam and traffic lights).

Technical Specification:

• Bulb Mounting Type: H4
• light beam power: 7600 lm
• type LED: bridgelux chip-on-board LED
• power consumption: 72W
• power voltage: 12v
• Certificates: CE, Compliance with ROHS
• Velevancy: up to 50,000 hours
• light color: xenon white (snow-white ~ 6000k)
• can-bus: yes, however, in cars with extensive electronics, these bulbs can cause a burning bulb error. We recommend buying LED CAN-bus filters with corresponding fixtures (available in our store).

The housing is made of high-quality aluminum, acting as a heat sink. Passive cooling system eliminates the risk of a refrigerant bulb failure, thus providing its long life.

dimensions of bulbs:

• height from fixing to the top of the bulb: 43 mm
• total height: 85 mm
• peak width of the bulb: 14 mm
• radiator diameter: 35 mm

LED cob bulbs have a total power of 72 watt. One, 36-watt bulb, is the equivalent of an ordinary bulb with a power of 130 wat

Thanks to the small size of the bulb, they are in almost every car lamp!

The set includes:

• two H4 LED COB bulbs, each with a power 36W / 3800 LM
• Complete wiring
• illustrated assembly instructions

Bulbs H4 LED COB C6 are equipped with a removable adapter (flange) of the bulb, as a result, which can be fully customized the angle of the light of the light of the Diode for the reflector. In addition, a removable flange facilitates the installation of light bulbs in lamps in which access to bulbs is difficult.

Why do you want to consider buying LED bulbs for an external car lighting?

Diametrical safety improvement - LED installation 3 times increases the light intensity (~ 3600 lumens) comparing to a halogen bulb (about 1200 lumens). Provides greater visibility on the road, larger field of view.

Smaller tiredness - light that is emitted by LED bulb color resembles daylight (6000k), to which the eyes are most adapted. Thanks to LED solutions, the driver is more perceptive, far faster can concentrate the eyes and better controls the situation on the road, less tormented eyes. Ordinary halogen bulbs emit light with a yellow color (3200k), require more intense work of eyesight. For a driver who drives in the opposite direction, LED lamp light is not troublesome, no blinding.

Impressive appearance - The use of modern LED technology increases the efficiency of the vehicle. LED light was until recently used in vehicle models from a higher price segment. AUTO with a bright white LED light is associated with exclusivity and greater attractiveness of the vehicle.

energy savings - LED circuit gets 72W. Halogen bulbs need 60% more power consumption. 2 lamps, twice as greater savings.

Saving bulbs - LED bulbs life is determined on average for 2,500-3000 hours. A usual 10x halogen bulb. LED bulb does not have a delicate tungsten filament, making it much more resistant to all kinds of shocks.

Headlight savings - LED bulb loses less heat energy and does not heat the reflector to a degree as a halogen bulb. It also emits less UV rays. Thanks to this, the headlamp does not discolor and do not deform.

Easy assembly - Installation of the LED installation consists in replacing bulbs and connecting electrical wires. All activities are simple to perform and reversible - at any time you can disconnect the LED kit and insert the previous bulbs in their place. If you sell your car, you can transfer the LED installation to a new one. It may only be necessary to exchange light bulbs for a model with a different frame.

plug and play assembly - maximum easy assembly.

Greater lifespan - bulbs do not lose brightness as an exploitation as standard halogen bulbs.

protection against damage - converters are resistant to moisture changes, temperature and fluctuations of the supply voltage.

modernity - sets are made according to the characteristics of the latest generation of LED systems. The bulbs were enriched with a modern cooling system. The use of fans allowed to protect the LED system against damage and increase the lifespan of light bulbs. In addition, the number of ingredients and wires necessary for assembly were minimized.

Behavior of the light angle - precisely set focal length causes that the replacement of a halogen bulb on the LED bulb does not significantly deform the light stream, especially for lentic lamps and is not necessary to re- Headlight adjustment.