LED Bulbs H7 360-K5 GT COB 80W 20000LM
- - LED bulbs H7 GT COB K5 80W 360 °
- - Type of diode: GT COB
- - Light color: ~ 6000k (snow-white)
LED lamps H7 GT K5 COB | 12V-24V CAN BUS | 20 000 lm
NEW - bulbs 360
due to the high efficiency of the LEDs in the set can use them as
- bulbs dipped (short)
- headlight bulb (long)
active cooling is to reduce the amount of air temperature with fan . The advantage of this embodiment is much larger cooling capacity than a passive cooling (no fan).
housing the bulb LED GT K5 is made from high-quality, strongly termoprzewdzącego aluminum ( Aviation aluminum 6063 )
Specifications < / strong>
- Model set of LED bulbs H7 GT COB K5 80W 360
- Number of LED bulbs 2
- Number of LEDs: 4 / bulb
- light intensity: 16000 lm
- Total lighting power: 2x 40W
- Splash-proof: IP67
- voltage: 12V - 24V
- light color: snow-6500k
- Replacement of bulbs: H7 H7R, H7M
- certification CE, RoHS
lamps have built-in filters CAN-BUS , so you do not cause errors on-board computer.
LED lamps H7 GT K5 are provided with removable collar bulb, which considerably facilitates the assembly of the bulbs in lamps to which access is difficult.
Fine multistage adjustment collar to adjusts of incidence of light on the reflector and the road.
the efficiency of light bulbs: Low beam (left side) and beam (right)
The optimized geometry and the arrangement of LEDs able to set the required cut-off light-shadow.
H7 GT K5 emit light on the road in a very precise achieving a unprecedented brightness, maintaining snowy white color light.
- Two LED bulbs H7 GT K5 COB 360
- Illustrated installation instructions
- package (ideal gift)
Quick installation instructions bulbs H7 LED
Step 1-2 : unfastening the retaining plate in the bulb socket H7 and disassembled old bulb.
Step 3 : Take off the adapter with LED bulbs H7. Put it in place of the bulb, and then fastened with retaining plate.
Step 4 insertion of the bulb in the fastened before the adapter. Connect to the ankle H7 bulb. The power cord bulb with ankle H7 best place in interiors lamps, between the housing and the reflector. Lamp can be rotated 360 ° in order to find the corresponding angle of incidence of the light on the illuminated area ahead of the vehicle.
Step 5 , the housing cover protects the interior of the tubes from moisture.
Despite the small amount of space in a test lamp (Fiat Punto) H7 after mounting LED, it was possible the closure of the shell, and also sealing the interior of the lamp. Before purchasing, we recommend to verify whether the target is a lamp supply space between the flange and the bulb cover. Our The distance between the lamp bulb and the edge of the housing to which the cover is inserted to 32 mm.