A set of LED bulbs H4 R4 80W 9600lm LUMILED LUXEON 12V-24V

Set LED H4 R4 80W 9600 lm | LUMILEDS LUXEON MZ CHIP diodes

• Replacement for regular H4 bulbs (low beam, high beam, fog light)

Technical Specifications:

• Total beam power: 9,600 lm
• LED type: LUMILEDS LUXEON MZ CHIP
• Number of LEDs: 2 / bulb
• Power consumption: 40W / bulb
• Light color: 6000k
• Supply voltage: 12V and 24V (9V-32V)
• Certificate: CE, RoHS Compliant
• Waterproof: IP68

CAN-BUS: Yes. The bulbs have built-in CAN-BUS filters, so they will not cause errors on the on-board computer, even in the latest cars!

LEDs with minimized dimensions and almost exemplary proportions of the dimensions of R4 LED bulbs ensure an exemplary light distribution even in a lensless lamp! Correctly focusing the light beam is very important because:

• The light bulbs do not dazzle oncoming drivers while driving
• 100% of the bulb's power is transferred to the road in front of the vehicle, not to the shoulder, directly in front of the hood or above the road surface
• There is no need to readjust the low beam and / or high beam bulbs
• We do not have to worry about the vehicle inspection

Thermoregulation of LED bulbs using modern, highly thermally conductive copper strips is one of the best and least emergency methods of cooling automotive LED bulbs so far.

This type of cooling system includes:

• Eliminated the problem of cheap electric cooling systems failure, which usually results in permanent damage to the LED systems
• Reduced bulb dimensions. A very common reason for the incompatibility of a light bulb with a car lamp is the inability to fasten the lamp cap by the protruding heat sink. Our bulb stands out from the competition due to the use of flexible strips that can be freely formed under the cover covering the interior of the lamp.

Sealing rubbers included in the set are designed to seal the inside of the lamp in a situation where the entire bulb could not be placed inside the lamp (pictures below). We invite you to see the video material illustrating the principle of installation and operation of bulbs on YouTube after adding / watch? V = tKY7CNkbHIs in the address bar.

Bulbs are equipped with:

• filters that eliminate disruptions in work CB and FM radio
• a filter that removes the error of the burnt bulb ( CAN-BUS ) after installing R4 bulbs.

We invite you to view the video material illustrating the principle of assembly and operation of light bulbs here: YouTube.com / watch? V = tKY7CNkbHIs

What will be included in the package?

• Two H11 LED CREE R4 bulbs, 4800 lm each
• Complete wiring
• Four rubbers sealing the inside of the headlamp
• Illustrated assembly instructions

Why is it worth using LED bulbs in car lighting?

Safety is dramatically improved - LED installation increases the light intensity 4 times (~ 4800 lumens) compared to a halogen bulb (approx. 1200 lumens). Provides greater visibility on the road, a larger field of view.

Less eye strain - The light that is emitted by the LED bulb resembles daylight (6000K), to which the eyesight is most adapted. Thanks to LED solutions, the driver is more perceptive, he can concentrate his eyes much faster and he has better control of the traffic situation, less straining his eyes. Ordinary halogen bulbs emit light with a yellow tint (3200K), they require more intensive eye work. For the driver driving in the opposite direction, the light of the LED lamps is not bothersome and does not dazzle.

Eye-catching appearance - the use of modern LED technology increases the efficiency of the vehicle. Until recently, LED light was used in vehicle models from the higher price segment. A car with bright white LED light is associated with exclusivity and greater attractiveness of the vehicle.

Energy saving - The LED circuit uses 60W. A halogen bulb needs 110% more power consumption. 2 lamps, saving twice as much.

Saving bulbs - The lifetime of the LED bulb is estimated at an average of 2500-3000 hours. Ordinary halogen bulb 10x shorter. The LED bulb does not have a delicate tungsten filament, making it much more resistant to all kinds of shocks.

Saving headlights - An LED bulb loses less heat energy and does not heat the headlamp as much as a halogen bulb. It also emits less UV rays. As a result, the reflector elements do not become discolored and deformed.

Easy to assemble - assembly of LED installation consists in hiding converters in a car lamp, replacing light bulbs and connecting electric wires. Everything is easy to do and reversible - you can disconnect the LED set at any time and put the old bulbs back in their place. If you sell your car, you can transfer the LED installation to a new one. You may only need to replace the bulbs with a model with a different socket.

Plug and Play assembly - extremely simple assembly.

Longer service life - bulbs do not lose their brightness with use to the same extent as standard halogen lamps.

Protection against damage - converters are resistant to changes in humidity, temperature and voltage fluctuations.

Modernity - sets are made in accordance with the features of the latest generation of LED systems. The bulbs were enriched with a modern cooling system. The use of fans allowed to protect the LED system from damage and increase the life of the bulbs. In addition, the number of components and cables necessary for assembly has been minimized.

Maintaining the angle of light - precisely set focal length causes the replacement of a halogen bulb with a bulb