LED MINI H7 F6 CSP light bulbs - 20,000 lm

• extremely efficient CSP LEDs
• small dimensions of the bulbs - the total height of the bulb is only 70 mm
• Refined geometry , improved arrangement of the bulb LEDs!

Due to the high efficiency of CSP LEDs, we recommend the use of bulbs as dipped and / or high beam lights in lamps:

• reflectors
• lenticular

Minimized LEDs and excellent proportions of the dimensions of LED SLIM bulbs ensure almost exemplary light distribution, even in a lensless lamp!

Correctly focusing the light beam is very important because:

• The light bulbs do not dazzle oncoming drivers while driving
• 100% of the bulb's power is transferred to the road in front of the vehicle, not to the shoulder, directly in front of the hood or above the road surface
• There is no need to readjust the low beam and / or high beam bulbs
• We do not have to worry about the vehicle inspection

Technical Specifications:

• Model: LED H7 F6 CSP low / high beam
• Number of LED bulbs: 2
• Number of LEDs: 2 packs of 3 LEDs / bulb
• LED technology: Seoul CSP
• Housing material: aluminum
• Splashproof: IP67
• Supply voltage: 12V
• Light color: snow white 6500k
• Certificate: CE, RoHS Compliant
• Lamp replacement: H7, H7R, H7M
• Luminance: 20,000 lm

H7 F6 CSP LED bulbs are equipped with gaskets that block the bulb collar at any angle to the reflector (LED position: up / down or left / right), as a result of which you can adjust the angle of the light emitted by the LEDs against the reflector. In addition, the removable collar facilitates the installation of bulbs in lamps that are difficult to access.

The kit includes:

• Two H7 F6 CSP LED bulbs with CSP diodes
• Packaging (perfect for a gift)

Due to the very high luminous efficiency of the set, the bulbs can be used as a replacement for low beam and / or high beam. The offered set of H7 F6 CSP LED bulbs significantly improves the visibility of objects in front of the car, and the visibility of the car by other road users.

The use of high-quality aluminum in the bulb housing makes the heat generated during the operation of the LEDs distributed throughout the bulb, and the turbofan blows warm air into the lamp housing, thus improving the efficiency of CSP LEDs and bulb life (up to 30,000 hours of continuous operation)

H7 LED bulb installation guide:

Step 1-2 : Detach the plate holding the bulb in the H7 socket and remove the old bulb.

Step 3 : Remove the adapter from the H7 LED bulb. We put it in the place of the bulb, and then fasten the mounting plate.

Step 4 : Insert the bulb into the previously fastened adapter. We connect the bulb to the H7 cube. The light bulb power cord with the H7 cube is best placed inside the lamp, between the housing and the reflector. The bulb can be rotated 360 ° in order to find the appropriate angle of incidence of light on the illuminated area in front of the vehicle.

Step 5 : Put a cover on the housing to protect the inside of the lamp against moisture.

Despite the small amount of space in the tested lamp (Fiat Punto II), after installing the H7 LED, it was possible to close the cover and seal the inside of the lamp. Before buying, we recommend that you check whether the target lamp has a spare space between the bulb's collar and the cover. In our lamp, the distance between the bulb and the edge of the housing on which the cover is inserted is 32 mm.