A set of LED bulbs H7 360-K5 GT COB 80W 20000lm
- - Complete set of LED bulbs H7 GT COB K5 80W 360°
- - Type of diode: GT COB
- - Light color: ~6000k (snow white)
LED bulbs H7 GT K5 COB | 12V-24V CAN BUS | 20,000 lm
NEW - 360 ° bulbs
Due to the high efficiency of the LEDs in this set, we recommend its use as:
- dipped beam (low beam) bulbs
- bulbs for high beam (high beam)
Active cooling consists in reducing the height of the air temperature with the help of a fan . The advantage of this solution is a much higher cooling capacity than in the case of passive cooling (without fan).
The GT K5 LED bulb housing is made of high-quality, highly thermally conductive aluminum ( Aviation aluminum 6063 )
Technical Specifications:
- Model: A set of LED bulbs H7 GT COB K5 80W 360 °
- Number of LED bulbs: 2
- Number of LEDs: 4 / bulb
- Light intensity: 16,000 lm
- Total lighting power: 2x 40W
- Splashproof: IP67
- Supply voltage: 12V - 24V
- Light color: snow white 6500k
- Lamp replacement: H7, H7R, H7M
- CE, RoHS certification
The bulbs have built-in CAN-BUS filters, so they will not cause errors on the on-board computer.
H7 GT K5 LED bulbs are equipped with a removable bulb collar , which greatly facilitates the installation of bulbs in lamps that are difficult to access.
Precise, multi-stage adjustment of the collar allows you to adjust the angle of incidence of light on the reflector and the road.
Thanks to the optimal geometry and arrangement of the LED diodes, they allow you to set the required light-shadow cut-off line.
The H7 GT K5 bulbs emit light onto the road in a very precise way, achieving an unprecedented brightness, while maintaining a snow-white color of the light.
The kit includes:
- Two H7 GT K5 COB 360 LED bulbs
- Pictorial assembly instructions
- Packaging (perfect for a gift)
H7 LED bulb installation guide:
Step 1-2 : Detach the plate holding the bulb in the H7 socket and remove the old bulb.
Step 3 : Remove the adapter from the H7 LED bulb. We put it in the place of the bulb, and then fasten the mounting plate.
Step 4 : Insert the bulb into the previously fastened adapter. We connect the bulb to the H7 cube. The light bulb power cord with the H7 cube is best placed inside the lamp, between the housing and the reflector. The bulb can be rotated 360 ° in order to find the appropriate angle of incidence of light on the illuminated area in front of the vehicle.
Step 5 : Put a cover on the housing to protect the inside of the lamp against moisture.