A pair of dedicated LED LOGO projectors for AUDI

• the offer is a pair, i.e. a set of 2.

If you need two pairs (i.e. for 4 doors), we encourage you to buy promotional sets displayed above the description and parameters of the offer.

At your choice we leave the pattern of the displayed LOGO. Please enter the number of the selected logo in the message to the seller on the delivery option form.

Attention: In the absence of information, we will send you a logo with the number 7.

The list of models to which the offered lamps fit :

• A1 8X1 (after 2010)

• A3 (1996 - 2018) and versions S3

• A4 B6 (2001 - 2004) and versions S4 | RS4
• A4 B7 (2004 - 2008) and versions S4 | RS4
• A4 B8 (after 2008) and versions S4 | RS4

• A5 (after 2007) and versions S5 | RS5

• A6 C5 (1998 - 2005) and versions S6 | RS6 | Allroad
• A6 C6 (2005 - 2010) and versions S6 | RS6 | Allroad
• A6 C7 (after 2010) and versions S6 | RS6 | Allroad

• A7 (after 2010) and versions S7 | RS7

• A8 D2 (1994 - 2002) and versions S8
• A8 D3 (2002 - 2010) and versions S8
• A8 D4 (2009 - 2017) and S8 versions

• Q3 (after 2011)
• Q5 (after 2008) and versions SQ5
• Q7 (after 2006)

• R8 (after 2007)

• TT / TTS (after 2006)

The lamps come with a set of cables that may be useful if the plugs are damaged, aftermarket, irregular, etc.

A non-invasive set without the need for drilling, chiselling or cutting. The lamps fit without any modifications, it is enough to install them in place of the original lamps located at the bottom of the door.

Technical Specifications:

• The logo is displayed in resolution HD
• 7 WAT power
• Modern, highly efficient diode LED SMD HIGH-POWER
• System CAN-BUS - no error messages for burnt bulb
• Waterproof housing
• Does not interfere with the radio FM / CB
• Fast and easy installation of PLUG & PLAY
• Works under voltage 12V
• Lamp dimensions: 55 mm x 25 mm

Price for the set - for 2 doors

The assembly of the lamps is so easy that you can do it yourself. All you need to replace the LOGO LED lamps is a flat-head screwdriver .

AND. Remove the old lamp by levering it and pressing the plastic element holding the lamp in the hole with a screwdriver. The lamp should detach itself from the mounting by itself.

B. Disconnect the plug from the old lamp.

C. We connect the plug to the new LED LOGO lamp.

D. We plug in a new LED LOGO lamp.