A set of LED bulbs H4 R4 80W 9600lm Lumiled LUXEON 12V-24V
- LED type: Lumiled LUXEON
- Power: 80W
- Light color ~ 6500K (pure white)
set LED H4 R4 80W 9600 LM | Lumileds Luxeon Mz Chip
- replacement of ordinary H4 light bulbs (low beam lights, traffic lights, fog lights)
Technical Specification:
- Total light beam power: 9600 lm
- type LED: lumileds luxeon mz chip
- Number of LEDs: 2 / bulb
- power consumption: 40w / bulb
- light color: 6000k
- power supply: 12V and 24V (9V-32V)
- certificate: ce, compliance with RoHS
- water resistance: ip68
CAN-bus: Yes. Light bulbs have built-in CAN-bus filters, so they will not cause errors on the on-board computer even in the latest cars!
Diode with minimized dimensions and almost standardized aspect ratio of LED R4 lights ensure the design layout of light even in a muster lamp! Suitable focus of light beam is very important because:
- light bulbs do not blind drivers running from opposite the
- 100% power bulb is transferred to the road before the vehicle, not on the roadside, directly in front of the mask or above the road tiled
- there is no need to re-adjust the heat and / or road light bulbs
- We do not have to be afraid of a vehicle review
thermoregulation LED bulbs using modern, strongly thermocycling copper strips is so far one of the best and least emergency methods of cooling car light bulbs.
This type of cooling system is:
- eliminated problem of a cheap failure , electrical cooling systems , which usually results in a fixed damage to LED systems
- reduced dimensions of the bulb. A very common reason for incompatibility with a car lamp is not possible to fasten the lamp plug by an protruding heat sink. Our bulb stands out against the competition due to the use of flexible strips that can be freely formed under a lid covering the interior of the lamp.
attached to the sealing gum task with the task of sealing the interior of the lamp in a situation where the whole bulb could not be placed inside the lamp (drawings below). We invite you to familiarize yourself with the video material illustrating the rule of assembly and operation of bulbs on YouTube after adding / watch? V = tky7cnkbhis in the address bar.
bulbs are equipped with:
- filters that eliminate work interference radios CB and FM
- filter removing a burned bulb ( can-bus ) after mounting light bulbs R4.
We invite you to familiarize yourself with video illustrating the principle of assembly and operation of light bulbs here: YouTube.com / watch? V = tky7cnkbhis
What will be in the shipment?
- two H11 LED CREE R4 bulbs, each 4800 lm
- Complete wiring
- four sealing rubber reflector interior
- illustrated assembly instructions
Why use LED bulbs in the car lighting?
Diametrical security improvement - LED installation 4-fold increases the light intensity (~ 4,800 lumens) comparing to a halogen bulb (about 1200 lumens). Provides greater visibility on the road, larger field of view.
Smaller tiredness - light that is emitted by LED bulb color resembles daylight (6000k), to which the eyes are most adapted. Thanks to LED solutions, the driver is more perceptive, far faster can concentrate the eyes and better controls the situation on the road, less tormented eyes. Ordinary halogen bulbs emit light with a yellow color (3200k), require more intense work of eyesight. For a driver who drives in the opposite direction, LED lamp light is not troublesome, no blinding.
Impressive appearance - The use of modern LED technology increases the efficiency of the vehicle. LED light was until recently used in vehicle models from a higher price segment. AUTO with a bright white LED light is associated with exclusivity and greater attractiveness of the vehicle.
energy savings - LED circuit takes 60W. A halogen bulb needs 110% more power consumption. 2 lamps, twice as greater savings.
Saving bulbs - LED bulbs life is determined on average for 2,500-3000 hours. A usual 10x halogen bulb. LED bulb does not have a delicate tungsten filament, making it much more resistant to all kinds of shocks.
Headlight savings - LED bulb loses less heat energy and does not heat the reflector to a degree as a halogen bulb. It also emits less UV rays. Thanks to this, the headlamp does not discolor and do not deform.
easy assembly - Installation of the LED installation consists in storing converters in a car lamp, replacing bulbs and connecting electrical wires. All activities are simple to perform and reversible - at any time you can disconnect the LED kit and insert the previous bulbs in their place. If you sell your car, you can transfer the LED installation to a new one. It may only be necessary to exchange light bulbs for a model with a different frame.
plug and play assembly - maximum easy assembly.
Greater lifespan - bulbs do not lose brightness as an exploitation as standard halogen bulbs.
protection against damage - converters are resistant to moisture changes, temperature and fluctuations of the supply voltage.
modernity - sets are made according to the characteristics of the latest generation of LED systems. The bulbs were enriched with a modern cooling system. The use of fans allowed to protect the LED system against damage and increase the lifespan of light bulbs. In addition, the number of ingredients and wires necessary for assembly were minimized.
Light angle behavior - precisely set focal length causes the replacement of a halogen bulb for a bulb