A set of LED bulbs H7 80W COB GT K5 16000lm
- LED type: COB GT
- Light color ~ 6000K (pure white)
LED bulbs H7 GT K5 | Modern ZES diodes 16000 LM 80W 12V-24V CAN Bus
LED bulbs set for light / road lights
Due to the high efficiency of LEDs in this set, we recommend it as:
- bulbs beating lights (short)
- Road light bulbs (long)
Active cooling consists in reducing the air temperature height with fan < / strong>. The advantage of this solution is much higher cooling efficiency than in the case of passive cooling (without a fan).
Bulb housing LED GT K5 is made of high quality, strong thermocolling aluminum ( aviation aluminum 6063 )
Technical Specification:
- model: set LED bulbs H7 GT K5 80W ZES 16000LM
- number of LED bulbs: 2
- Number of LEDs: 6 / Bulb
- light intensity: 16000 lm
- total current consumption: 2x 40w
- Spot resistance: IP67
- power voltage: 12v - 24v
- light color: snow-covered 6500k
- replacement for bulbs: H7, H7R, H7M
- certification ce, rohs
Bulbs have built-in CAN-bus filters , so that they will not cause errors on on-board computer.
LED bulbs H7 GT K5 are equipped with a removable flange bulb, which greatly simplifies Installation of light bulbs in lamps to which access is difficult.
Precision, multistage collar adjustment enables Angle adjustment Passage lights for the reflector and the way.
effectiveness of bulbs: passing lights (photo on the left) and traffic lights ( Rights Page)
Thanks to the optimal geometry and deployment of LEDs, they enable the setting of the required light-shadow cutting line.
H7 GT K5 bulbs emit light on the road in a very precise way, reaching at This unprecedented brightness, while maintaining snow-colored color.
The set includes:
- Two LED bulbs H7 GT K5
- Picture assembly instructions
- Packaging (perfect for gift)
Quick Installation instructions H7 LED bulb:
Step 1-2 : Determine the tin fastening the bulb in the H7 socket and remove the old one Bulb.
Step 3 : Remove the adapter from the LED H7 bulb. Put it in place of the bulb, and then push the mounting tin.
Step 4 : Slide the junger in a fastened adapter. We connect the H7 ankle bulb. The bulb power cord together with the H7 cube is best placed on the interior of the lamp, between the housing and the reflector. The bulb can be rotated by 360 ° to find the appropriate light incidence angle to the illuminated area before the vehicle.
step 5 : on the casing we assume a cover protecting the inside of the lamp against moisture.
Despite a small amount of space in the tested lamp (Fiat Punto II), after installing H7 LED, it was possible to clamp the shield, And at the same time sealing the interior of the lamp. Before buying, we recommend verifying whether a space between the bulb flange and the cover is available in the target lamp. In our lamp, the distance between the bulb and the edge of the housing on which the cover is inserted 32 mm.